ISO STANDARDS

ISO 9001 : 2008 Quality Management System - Requirements

ISO 9000 : 2000 Fundamentals and Vocabulary

ISO 9004: 2000  Quality management and quality system elements - Guidelines.

ISO 10011-1: 1990  Guidelines for auditing quality systems - Part 1: Auditing.

ISO 10011-2: 1991  Guidelines for auditing quality systems - Part 2: Qualification criteria for quality systems auditors.

ISO 10011-3: 1991  Guidelines for auditing quality systems - Part 3: Management of audit programs

Indian Standards

• Indian standard IS : 4454 (Part IV) - 1975 and 2001 spec. for cold formed springs.
• Indian standard Stainless steel Wires rods - specification IS 6527 : 1995.
• Indian standard Stainless steel Wires rods - specification IS 6528 : 1995[Rev 1].
• Indian standard specification for Resistance Wires, Tapes and Strips for heating elements IS : 3725 : 1966.
• Indian standard : method for simple Torsion test for Wire.
• Indian standard IS: 4748 -1988 spec. for Grain Size.
• Indian standard IS : 5347-Part 2: 1993 - ISO 5832-1 : 1987 - spec. for Requirements for orthopedic implants.
• Indian standard IS : 5347-Pm1 13 : 1997 - ISO 5832-9 : 1992 - spec. for Requirements for orthopedic implants.

JIS - Japanese Standards

• JIS G 4314 - 1994 - S. S. Wires for springs.
• JIS G 4308 - 1991 - Stainless steel Wire rods.
• JIS G 4318 - 1998 - cold finished S. S. Steel bars.
• JIS G 4311 - 1991 - Heat resisting steel bars.
• JIS G 4315 - 1994 - Stainless steel Wires for cold heating & cold forging.
• JIS G 4309 – 1994 – Stainless steel Wires.
• Method of Tensile Test for Metallic Materials JIS Z 2241.
• NAS Wires standard.

American Standards

• Specification for base stainless steel welding Electrodes & rods - ANSI / AWS A 5.9 - 93.
• Specification for stainless steel Electrodes for Shielded Metal Arc welding ANSI / AWS A 5.4 - 92.
• ASTM designation: F138 – 92 – standard specification for stainless bars & Wires for surgical implants. F - 139 - 92 (sheet & strip) – > (Special Quality).
• ASTM designation: A479 / A479M - 95b - standard specification for stainless steel bars and shapes for use in Boilers & other Pressure vessels.
• A 311 / A 311 M - 95.
• ASTM - E45 - standard test methods for determining the Inclusion content of steel.
• ASTM A 193 / A 193 M – 95a – Standard specification for Alloy steel & stainless steel bolting materials for high temperature service.
• ASTM – Standard Vol. 1.03 - 2007.
• Specification for base stainless steel welding Electrodes & rods - AWS A5.9/ A5.9M – 2006.
• ASTM – E92–82–[Reapproved 1997] – Standard test methods for Vickers Hardness of Metallic Materials.
• ASTM – E 10–01 – Standard test methods for Brinell Hardness of Metallic Materials.
• ASTM – E18–00 – Standard test methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials.
• ASTM – E8-01 - Standard test methods for Tension testing of Metallic Materials.
• ASTM – F 606-02 - Standard test methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets.
• ASTM – F 139-03 - Spec. for Stainless Steel sheet and strip for Surgical] mplants [UNS S31673].
• ASTM – E 112-96, Rev.04 - Spec. for Determining Average Grain Size.
• ASTM – E 228A/A228M-02 - Standard specification for Steel wire, Music Spring quality.

European Standards

• DIN 17224, BS 2056:1991 – European standard for stainless steel spring Wires.
• Inspection documents for metallic products DIN EN 10204 – Aug. 1995.
• Stainless Steels – Technical delivery condition for general-purpose sheet / plate & strip – DIN EN-10088-2 Aug – 1995.
• Stainless Steel – for general purpose Semi finished products, bars, rod and sections DIN EN 10088-3 – Aug. 1995.
• Material testing certificates DIN 50049.
• Stainless Steel - Technical delivery condition for plate and sheet, hot rolled strip, wire rod, drawn wire, steel bars, forging and semi finished products DIN 17440 - July' 1985.
• DIN 51211 - September' 1978 - SPEC. FOR REVERSE BEND TEST OF WIRES.
• DIN - EN - 10270-3 - August '200 I - SPEC. FOR STEEL WIRE FOR MECHANICAL SPRINGS.
• Stainless Steel- for general purpose Semi finished products, bars, rod and sections DIN EN 10088-3 - Sept. 2005.
• DIN - EN - 20635-5 - Feb.'2002 - SPEC. FOR STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION.
• DIN - EN - 439 - May' 1995 - Spec. for Shielding gases for arc welding and cutting.
• ISO - 544 - Nov '2003[3^rd edition] - Spec. for welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerance and markings.
• DIN - EN - 14532- 1 - Feb '2005 - Spec. for welding consumables - Test methods and quality requirements.
• BS - EN - ISO - 14343 : 2007 - Spec. For Welding Consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - classification.
• DIN EN 10204 - Oct. 2004 - Spec. for Inspection documents for metallic products.
• DeN EN 10263-5 - Feb. 2002 - Spec. for Inspection documents for metallic products.
• ISO 18274 - 1 : 01.03.2004 - Spec. for Welding consumables - Wire and Strip electrodes, Wires and rod for arc welding of Nickel and Nickel Alloys.
• ISO 15630 - 1 : 15.04.2002 - Spec. for Reinforcement and prestressing of concrete - Test methods - Part 1 - Reinforcing bars, wire rod and wire.
• EN 6744:2001 - [+A2:2009] - Spec. for S. S. Bars for reinforcement of and use in concrete - requirements and test methods.
• BS 8666 : 2005 - Spec. for Scheduling, dimensioning bending and cutting of steel reinforcement for concrete.
• BS EN ISO 10264-4 : 2002 - Spec. for Steel wire for Ropes.
• BS EN 102 J 8-1 : 1994 - Spec. for Steel wire and wire products - Part 1 - Test Methods.
• BS EN 145321-1 : Feb. 2005 - Spec. for Welding consumables - Test methods and quality requirements.
• BS EN 10002-1 : 2001 - Part 1 - Spec. for Metallic materials for tensile testing. Method of test at ambient temp.